Using cold glue adhesives

EUROTHANE Bi-3/Bi-3A, POWERDECK F/POWERDECK FA on - concrete roof – roofing membrane (bituminous, synthetic) fully bonded with cold adhesive

ROOF SYSTEM DESCRIPTION

1. Concrete
2. Concrete treatment : bituminous adhesive varnish
3. Vapour barrier : reinforced bituminized glass fibre, torched on tot the concrete, overlap minimum 70 mm, overlaps (also torched)
4. Adhesives insulation : bituminous cold glue or PUR glue applied in continous lines; distance between lines approx. 20 cm; distance from panel edge to first glue line -maximum 10 cm
5. Thermal insulation board : EUROTHANE Bi-3/Bi3A, POWERDECK F/POWERDECK FA panels, 1200 mm x 600 mm for thickness < 60 mm; 600 mm x 600 mm for thickness > 60 mm. Press insulation panels firmly down on to the glue lines
Press the insulation boards firmly into the adhesive strips.
6. Cold adhesives for the membrane : bituminous cold glue, contact glue compatible with the insulation panels,… fully bonded on the insulation layer. (can be replaced by a self-adhesive membrane)
7. Waterproofing : bituminous / single ply.