Internal roof insulation

General

- The choice of the manner of fixation and the supporting structure is mainly determined by the nature of the base as well as the physical construction requirements. EUROTHANE G boards can be used as wall, ceiling and partition wall coatings. The boards are then attached to a wooden supporting structure.

- As a wall coating, EUROTHANE G insulation boards can also be bonded directly to the base using adhesive gypsum plaster.

- EUROTHANE G boards must be positioned about 1 cm from the finished floor to avoid the absorption of moisture by the plasterboard. If this is not possible and the boards must be positioned flush to the floor, the bottom edge of the board must be protected with a plastic foil or sealing kit.

Fixation against the inner side of a pitched roof

- EUROTHANE G boards can also be fixed against the inner side of a sloping roof.

- Wooden slats must be used for this.

- For the attachment to the inner side of a sloping roof a trellis must be provided to support the EUROTHANE G boards. This trellis must be attached as flat as possible to the wooden structure of the roof truss. The EUROTHANE G boards are also attached to this with screws.

1. Roof covering
2. Batten
3. Batten strip
4. Roof underlay foil
5. Truss
6. Wooden trellis
7. EUROTHANE G