Fastening with wooden laths

1. PE foil (min. 70 mm)
2. Reinforcement
3. PE foil
4. EUROFLOOR
5. Anti-dust coating
6. Concrete floor
7. Foundation
8. Edging strip
9. Vapour-tight tape
10. Wooden edge battens
11. Plastic nail
12. Long side of frame
13. EUROTHANE

IMPLEMENTATION

The EUROTHANE boards, fitted with a frame along the long side, are attached to the walls (see detail) with plastic plugs (e.g. Hilti - IDP).
The wooden batten (10) has two functions:
• to secure the boards evenly
• to protect the boards
The seams are covered with vapour-proof tape (9).

When installing EUROTHANE insulation ensure that it forms a good join with the floor and roof insulation.

In storage areas with low temperatures (lower than 4°C) we recommend positioning a continuous PE foil against the wall first. Any overlaps must be a minimum of 20 cm.

The edge at the bottom offers additional protection (8).